YZ10 1994
 

Ok guys thanks to Justin for selling me this and just thought i'd show you what I have done so far. Still needs the titanium Lundsford tie rods, the slipper clutch and matching battery plate plastic holders, as my race car in the 90's had white both ends. Other than that the diffs are smooth, the shocks are exactly as I used with exception of the kit springs which I am still searching for.

Looks tight, just wrangling in some brushless in mine for a meet soon, had to blag the esc out my last instal haha!

Lee

Very nice looking YZ-10. Your doing a nice job.
I have a couple of pics of my car.

Very nice. Im missing two items, the steering brace going over the steering poles on the chassis and the tiny brace that sits above the top deck over the layshaft. Any chance you could measure for me so i can get made from carbon fibre? Also just added a Tekin 410k, and a Sanwa Gemini Exerd receiver and then just the servo.

Not a problem. I just need to find what box I put it in. It may take a few days. The car has a Tekin 411-G2 esc with a KO Propo 1001 FET servo.
I bought every option part that was available in 94, right down to the titanium screw set.

I think i have a spare layshaft spacer kicking around Welshy, can send it over if i can find it, it came off a restore i sold on as i fitted a Hansell one!

Lee

Lee,

Cheers, let me know if you find it and will give you my address details. Thanks

I sold most of my works 91 parts last year, but i still got a PS 1001 FET servo fully fuctional, if anyone is interested.

Great seeing the old Yokes being restored to their original state! Loved those cars in the early 90s.

Cheers
Chris

[Update: servo is sold and no longer available!]

Oh, and some black Keil Wheels (n.i.p)... pm me if you're interested.

Cheers
Chris

Measurements
 

Welshy40,
I got the car and found a caliper. The steering brace is 51mm x 7mm, 2mm thick. Tiny top brace 19mm x 6 mm, 2mm thick. I hope this helps.
Scott

MX-4
 

Here are a couple of pics of my MX-4.

Scott,

Im dribbling, YZ10 looks stunning and the MX4 as well.

Thanks, really appreciate this.

Spring Time
 

They're coming...

Mate, appreciate your help with this, springs look superb on it. Thanks.

Just fitted KO 1001, carbon fibre steering brace and luckily remember that on the day i got the car had already bought this option and fitted using white associated RC10 wheel nuts so now looks almost the way I had it. Now to get white ball joints for the steering tie rods and aquire a slipper clutch and titanium tie rods and its done.

Also thanks to Peaky ive now fitted the white battery mounts, thanks.

Looking good James, just need a new body how are you gonna paint it or have we got to wait? I'm looking for inspiration

Very nice James, those springs look good. :thumbsup:

Its going to be my usual paint job thats been my tag since Craig Harris decided i needed a good design in the very early 90's, like my ZXR, RC10B2, ZXS, SWorkz a red dragon draping over a green shell. First paint job will be my Masami RC10 91 shell, then this. Also must say thanks for your help as well, means a lot.

Still got to locate these but not much. Tbh ive got rc10 91 worlds bits that i can trade for some of these if anyones going to do that car.

Slipper clutch and layshaft if required.
Brace for screws on top deck by motor
Titanium tie rods (easy for me to get)
White associated ball cups (easy for me to get)
Team Corally 10d silver or gold (forgotten exact colour when driving these)
Body & undertray as ive found mine today and it got squashed (gutted)
White spring spacer half size compared to the one on the front shocks.

They really do and cant thank you enough for what you have done. When finished it will look stunning.Took this apart a while ago and stunned on how easy it is to work on. Really is an amazing design.

Not a problem buddy glad it's turned out how you wanted it :thumbsup: