oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)
-   -   Orca TX 17.5T (http://www.oople.com/forums/showthread.php?t=162563)

Ninjagordy 22-01-2015 01:25 AM

Orca TX 17.5T
 
Hi Guys ,

do any of you know what the kv rating/ average max rpm range is for one of these swapped one out with my Turnigy Trackstar 17.5T , geared it the same but the Orca ran a little hotter?

cheers

Gordy (Geared at 3.99 in an xray T4 13 , 31m straight on carpet)

Craig W 24-01-2015 11:28 PM

try gearing some were around 4.2 as motor needs to rev

Hydrakermit7 25-01-2015 12:00 AM

I ran a FDR of 4.44 if that helps

Ninjagordy 25-01-2015 01:31 AM

Orca 17.5 TX
 
Hi Guys,

Thanks for the Replies.... I dropped the gear ratio as far as 4.5fdr and played about with the end bell timing etc. we run blinky so limited to gearing and endbell adjustment. the lotor was starting to get hot so after a play i went back to my Turnigy Trackstar 17.5T (£23 new).

the Trackstar was consistently 0.3-0.4s per lap quicker, less heat and better bottom end.... astonished at that as its 1 3rd of the price of the orca!!

cheers lads!!

Gordy! :o


All times are GMT. The time now is 04:37 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com