oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   1/18th & Micro stuff (http://www.oople.com/forums/forumdisplay.php?f=36)
-   -   what BL motor and ESC setup for EMB-1 (http://www.oople.com/forums/showthread.php?t=160124)

tonydevon 24-11-2014 12:12 PM

what BL motor and ESC setup for EMB-1
 
as per the title, its my first micro so Im not after ballistic mach 9 performance, trying to keep it affordable and reliable.

thanks

Karting 24-11-2014 01:09 PM

Quote:

Originally Posted by tonydevon (Post 887268)
as per the title, its my first micro so Im not after ballistic mach 9 performance, trying to keep it affordable and reliable.

thanks

Hobbywing 35amp speedo
Losi/Carisma (both same different packets) 4500kv motor. All in all the com o will be around £40.

If doing nationals, same Speedo but get the 6800kv motor for the long straights.

If you do follow the above advice, dint use the kit emb opinions as they won't fit on the shaft, once again buy the losi/carisma ones for a few quid each.

Also visit www.microrcracer.com as it's a dedicated site for all micros ��

tonydevon 24-11-2014 01:24 PM

thanks will go browse them items

Tony

shaungooner 24-11-2014 03:58 PM

Tony the LC can use a slightly larger motor can the Carisma so I'd go for this from Craig Harris at Thumbs Designs

http://thumbsdesigns.com/product/leo...order-special/

The kit pinions for the LC will fit on it too!

Hobbywing 60 amp ESC will be fine although most of the top drivers are using the extreme stock below

http://thumbsdesigns.com/product/hob...sc-blue-60a-2/

old jonesy 25-11-2014 07:54 AM

Hobbywing 35amp speedo with the LC kit motor LCL6048 will do the job.


All times are GMT. The time now is 09:17 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com