Rb6 servo saver
 

Im running an rb6 and need to know if i should run a servo saver? Or dont people run with one? Cheers

Run all mine without dude only broke one crank arm In 18mths

If you run a decent servo then no need for a saver.
Just use the std plastic horn and even with a alloy rack and cranks not had an issue for over 9months.
Ps
And I do crash a fair bit...

Has never caused me a problem running without one either on the RB6 or DEX210 previously, as long as you run a decent servo and stick with the stock plastic servo horn the horn will always strip before the servo gears in the event of a heavy impact:)

Cheers fo the replies will run a plastic horn:)

Kit ones are good pal