oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   12th & 10th On Road (http://www.oople.com/forums/forumdisplay.php?f=14)
-   -   13.5t blinky (http://www.oople.com/forums/showthread.php?t=157638)

vernon7026 29-09-2014 05:56 AM

13.5t blinky
 
Does anyone have an idea for pinion and spur on an mi5 using
13.5t thunder power engine ,

I would run this as blinky ?

Any ideas

beale 29-09-2014 10:22 AM

I run 42t pinion 104t spur 64dp on an open track in my Xray, there is no real straight but you could add EBT and bigger pinion if your track does

catman79 29-09-2014 11:02 AM

what size track are you running on, fast flowing / tight technical?

beale 29-09-2014 12:59 PM

Its about 40 x 30m I could go taller on the pinion as motor only ever gets warm, I get good acceleration and reasonable top speed at that so don't tend to bother much, plus I use the same in 17.5t just with 40deg EBT

vernon7026 29-09-2014 01:46 PM

Currently I have pinion 34 and spur 64 bear in mind this has
No turbo or boost( blinky ) or should I run turbo etc etc

The track is aldershot

Any info will be great

beale 29-09-2014 05:00 PM

See what they run most clubs run 13.5 boosted and 17.5 blinky, I only run 13.5 blinky as my ESC needs a PC to swap profiles

vernon7026 29-09-2014 06:14 PM

What would your final ratio be ?

sosidge 29-09-2014 06:49 PM

I the class is for boost, then there is no comparison with Blinky, 13.5 boost is much much faster, and the gear ratio is very different as well.

Decide what class you are running in and ask at the track, you are sure to get a solid basic setup from someone.

beale 29-09-2014 07:08 PM

In 13.5t boosted I ran 6-6.5 FDR for blinky 4-5 FDR
In 17.5t blinky 3.7 - 4.7, but all these depend on track layouts and motor temps after a few minute run


All times are GMT. The time now is 12:22 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com