B6 Li-po Lipo Charger For Lipo/NiMh/Lilon/Life/Nicd/Nim
 

I have for sale this new lipo charger with the following specifications:

Pm me for offers :thumbsup:



Features:

• Specifications:
  Operating voltage rang: DC 11.0~18.0 volt
  AC to DC adaptor (DC 11.0~18.0V/5A)
  Circuit power: Max. charge power 50W
  Max. discharge power 5W
  Charge current range: 0.1~5.0A
  Discharge current range: 0.1~1.0A
  Current drain for balancing Li-po: 300mAh/cell
  NiCd/NiMH battery cell count: 1~15cell
  li-ion/Polymer cell count: 1~6 series
  Pb battery voltage: 2V~20V
  Weight: 260g (Net Weight)
  Dimensions: 117*85*30mm
• Introduction
  Thank you for purchasing the B6 Lipro Balance charger. This product is a rapid charger with a high performance microprocessor and specialized operating software. Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating and safety. Or please do use this product in company with a specialist!
• NiCd/NiMH
  Vultage level:1.2V/cell
  Allowable fast charge current:1C-2C (Depends on the performance of cell)
  Discharge vultage cut off level: 0.85V/cell (NiCd), 1.0V/cell(NiMH)
• Li-ion
  Vultage level:3.6V/cell
  Max.charge viltage:4.1V/cell
  Allowable fast charge current:1C or less
  Min. discharge vultage cut off level: 2.5V/cell or higher
• LiPO
  Vultage level:3.7V/cell
  Max.charge vultage:4.2V/cell
  Allowable fast charge current:1C or less
  Discharge vultage cut off level: 3.0V/cell or higher
• LiFe
  Vultage level:3.3V/cell
  Max.charge vultage:3.6V/cell
  Allowable fast charge current:4C or less
  Discharge vultage cut off level: 2.0V/cell or higher
• Pb
  Vultage level:2.0V/cell
  (Lead-acid) Max.charge vultage:2.46V/cell
  Allowable fast charge current:0.4C or less
  Discharge vultage cut off level: 1.75V/cell or higher

lipo charger
 

you have mail