setup for EPO B4
 

Hi gents anyone got a full setup for a b4 for EPO
i have a basic setup but no camber link positions or amount of limiting for the shocks.
Also what tyres work there is it not a bb pins type astro ?
Also what would you gear a 5.5 bonded at

Cheers

Spud man

Edit your thread dude! its EPR not EPO, I got told off for this!!

Just read the set up section, found this from a fellow oopler! from EPR national:

Front:
Blue Front Spring
35wt oil
Number 2 piston

Rear:
Silver rear spring
30wt oil
Number 1 piston
Middle on Tower
Inner on Wishbone

1 deg Anti-squat
Med wheelbase
cells in forward position
10g weight on the servo can help
Middle on Tower
Inner on Wishbone

Camber links as per kit


Make sure you have weight in all the normal places (under the rear bulkhead / rear pods etc)

Dude i saw this but wanted to ask bout gearing and tyres mate lol
As u can see im real busy here lol

Sch Green Mini Spikes if damp/wet and Sch Yellow Mini Spikes when dry. we try and get Yellows on as soon as possible. The BB spike doesnt really work as well as the Sch Mini Spike

Gearing wise, 6.5T with a 12.5mm sintered rotor in a B4 is 23/81.

Cheers matt most helpfull dude.

No worries.

I do have my basic set-up as a PDF file and this is how I have run my car all year. It can be e-mailed if you want it?

Now we will have to see what's necessary when running with LiPo...

Yes please matt

[email protected]

Richard

Rich can you forward Matts set up to me? Or print off a copy and bring it to the shop?

Yes Matt I was thinking about what diffence lipo batterys will make to the B4 set up, I ran my B4 with STD set up and put my trakpower 3600 in it and it went fine! If anything it jumped better !

Maybe going one lighter on springs front and rear? Could help the car roll and generate more grip ?

You and I are thinking same thing mate silver fronts and green rears

set up info for sunday, Schu greens and tons of blue tac !!!!!!