oOple.com Forums - MY FULL CARBON TEAM C MID MOTOR

Page 1 of 2

Show 40 post(s) from this thread on one page

oOple.com Forums (http://www.oople.com/forums/index.php)

- I Made This ! (http://www.oople.com/forums/forumdisplay.php?f=25)

- - MY FULL CARBON TEAM C MID MOTOR (http://www.oople.com/forums/showthread.php?t=152461)

jerzi

14-06-2014 11:14 AM

MY FULL CARBON TEAM C MID MOTOR

1 Attachment(s)

Will start an new project.
Here is what I have to offer you.
Jerzi

jerzi

16-06-2014 08:56 PM

Ok. No progress yet but the car will be 1cm longer then the standard length are.
Jerzi

jerzi

19-06-2014 12:55 PM

4 Attachment(s)

Little progress here.
Jerzi

adey	19-06-2014 04:41 PM

why are you not making the chassis and rear tplate as one peice ?.

jerzi

19-06-2014 05:58 PM

4 Attachment(s)

I tryed but it was to difficult to put the transmission to the t plate. And of course the arm support.
Jerzi

adey	19-06-2014 09:03 PM

I had the idea of making a carbon fibre chassis for mine. I was going to use some circuit board threaded spacers to mount the gearbox. I have used them before and they work well. I may dig out my design and send it too Fibrelyte to make for me.

jerzi

19-06-2014 10:00 PM

Do you have some pics to share.
Jerzi

adey	19-06-2014 11:51 PM

I can't upload pics for some reason

jerzi

20-06-2014 05:26 AM

I had the same problem but found out what the issue was.
Is there on the market carbon chassis for sell to this car.
If somebody knows so please share some links..
Jerzi

jerzi

20-06-2014 01:04 PM

6 Attachment(s)

More progress.
Jerzi

jerzi

21-06-2014 03:58 PM

4 Attachment(s)

Iam getting there.
Jerzi

jerzi

22-06-2014 03:42 PM

1 Attachment(s)

Little progress.
Jerzi

jerzi

24-06-2014 02:12 PM

5 Attachment(s)

It is not ready yet but comming there..
Jerzi

jerzi

24-06-2014 03:05 PM

At this point the car weights 1395gr without recivier.wing and the esc.
I have lots of aluminium in the car so thats wy the weight is so high.
Jerzi

jerzi

25-06-2014 09:58 PM

3 Attachment(s)

Start working on the body now.
The funny mould is now ready and the mould release wax is on.
Now ill laminate the glassfiber on and that will be the mould and with the mould will my friend make bodies to me.
Jerzi

jerzi

25-06-2014 11:16 PM

3 Attachment(s)

Ok.
I put one layer of glassfiber and there was an big no for that so I took the carbon cloth and start stopping that on the body.
Now the moulding is ready and I hope I have pics for you of an ready dry carbon body mould.
This carbon body is so heavy that this cant be use, but for sure it is stiff.
Jerzi

jerzi

26-06-2014 11:58 AM

1 Attachment(s)

The carbon body mould is great but not near ready.
Jerzi

jerzi

26-06-2014 01:29 PM

2 Attachment(s)

Some progress on the body.
Lots of putty and lots off sanding near future to come.
Jerzi

jerzi

27-06-2014 06:22 PM

5 Attachment(s)

Body is allmost ready.
Just the clearcoat and offwego.
Jerzi

jerzi

30-06-2014 08:19 PM

1 Attachment(s)

Okey. I have done some misstakes on the mould so today I made an carbon body so lets see how good it is going to be.
I used 600gr carbon cloth so it is going to be very stiff.
More pics tomorrow.
If you have some question about this project so let it come.
Jerzi

All times are GMT. The time now is 04:57 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page