SX3 lipo tray dimensions
 

Could someone please let me know the outside width of a single lipo saddle tray ? :blush:

Need to check if they fit before i purchase :thumbsup:

Cheers

John

Are 1s lipos the same width as saddles at about 46/47 mm. I don,t have saddles yet but do have 1s ?

Need the width of the holder to make sure it will fit on the chassis and allow the Bosscat bodyshell to fit

Hoping someone can help

Cheers

I've used a SV2 lipo tray on my ProCAT and as you can see it fits easily within the width of the original chassis. SX3 trays are a little wider but not much, should still fit fine.
Hope that helps.

Thanks for the reply. The problem I have is the belt is above the lower chassis on the Bosscat not like the Procat. My plan is to cut the lipo holder in half & hope is does not touch the lower belt cover.

Cheers

I still think you will have plenty of room for saddle lipos on the Bosscat chassis.
See pic