DESC210R Alu Chassi - Where to buy?
 

Hello,

does anybody know where i can buy a alu chassi for my DESC210R? The Original Chassi is to flexi :)

Thanks
Jens

Hi Jens,

How about the RD +11?
Sorry, i can't find the thicknes of it!
Doesn't have the DESC210 allready a +8 chassis length?

http://www.revolution-rc.com/our-pro...assis-set.html

DESC210 is around 65mm longer than a standard DEX210 aluminium chassis!

Ah ok, i didn't know that, as i dont have one!?:blush:

Jep thats the point.

I cant find a alu chassi for that car. Does anyone built a alu chassi themeself?

There has been a few people gauging interest in making them, but it seems there hasn't been much interest http://www.rctech.net/forum/r-c-item...m-chassis.html

Have you tried the type B DIMEC20 chassis? It's a lot stiffer than the original chassis and performs better on high grip surfaces.

Try the Dimec20. Its very stiff.

We've stiffened ours massively by making a battery strap the uses 4 points on the top, makes a huge difference!

Like this ;)

http://i696.photobucket.com/albums/v...ps1fd5105e.jpg

The machinist was too busy to crank these out. Very few +8mm where made, a couple ST's and 2 SC chassis. They are wicked dialed but not much else I could do to speed it up :( a 4 point battery strap will limit flex, and the new type B chassis is much stiffer. Give the dimec20 type B a try.