Lazer ZX 5 SP fs2 wheels on Losi 22-4
 

I just measured wheels taken from a Lazer ZX 5 SP fs2 and they are almost identical to the ones shipped with the Losi 22-4.

Here is my findings:

Lazer ZX rear offset | Losi 22-4
Rear offset: 27.5mm | 26.5mm
Rear width: 37.5mm | 38.0mm
Front offset: 26.0mm | 25.0mm
Front width: 27.5mm | 26.0mm
Hex front: 12.0mm | 12.0mm
Hex rear: 12.0mm | 12.0mm

The offset I used here is the measurement from the inside of the wheel (where the hex sits) to the outer part of the wheel.

So because the offset is greater on the Lazer but the wheel width is narrower, it places the Losi 22-4 with the Lazer wheels 0.5mm wider on the rear and 0.5mm narrower on the front.

The question is, how will this alter driving characteristics, if at all.

I will try this combination to see how the car drives.

Simon