Spektrum RX wire
 

I have a broken RX wire on a spektrum micro RX, can you buy this wire on its own??

Is it a special kind of wire or can I use some nomal small gauge cable??

If its an early one of the spektrum receivers its just single wire, if its newer then it chance to be the coax type cable ( centre copper core with braided cable outside ) strip a small part of the old one, or if you are feeling brave pop the receiver open, if it has a plug to the circuit board it is coax, if its soldered straight in its just single wire;)

Cheers for the reply Pugs, or the other option is to send it to you! ;)

This is the RX I have:

http://www.spektrumrc.com/Products/D...ProdID=SPM1210

To me looks like a single core wire

With the single you can just solder it in. Maybe try the orange RX as they are DMS2 and small as well. Cheap from HK.
THere is a site doing the clones that I used without problems

Thanks onekiwi, I dont think the orange rx will work as its on a KO esprit 3 with spektrum pro module.

I think that one just uses a piece of standard wire.

Standard wire, I actually have some pieces cut to the correct length.

If you're ok at soldering, whack me your address and I'll pop a couple in the post to you.

Thanks for the offer russmini, ended up fixing it track side with a normal rx single strand wire, all working fine.

cheers for the help guys :thumbsup: