Your speedo dimensions in the 410
 

Hi guys,was just wondering if you know what the L/W/H of your speedo's are in your 410 and how well they fit in with the reciever in such a small space.
(My reciver is a core)
The reason i ask is I've just ordered a combo and the esc dimensions are 39mm-38mm-20mm. I was wondering what the biggest is that can go in with the size of reciver I have.

If this is a tight fit I'm thinking of putting my Absima cts 10 in which Is a bit smaller. I've had a look on the install pages but quite a few are running micro receivers in there's.
Any info would be greatly appreciated.

Phill

You pretty much need a micro RX in there or remove the RX box and shrink wrap it then stick it somewhere.
I have seen a RX8 in there and a reventon pro.. they are pretty large as well as a mamba max I think it was on the rctech pages, there are a few to go through there

R10 fits nicely so will the CTS10

If you've got a Core RC transmitter with the LCD screen, you can use this mini receiver: http://www.hobbyking.com/hobbyking/s...y_3XS_TX_.html

Works perfectly and a lot smaller than the stock receiver.

That's the Fhss reciver,I've got the old radio. The dark brown case on it.
Some thing like that would be great though.

This is the etronix that I have in my tm2 at the moment.

ET1050 Etronix Pulse EX3G 2.4GHz Receiver (CR139)

Hi there, I run a Speed Passion GT 2.0 LPF with a Spektrum SR301 (standard sized/quite big receiver) which I run on its side underneath the front centre driveshaft and have no problems.

That's where I had my reciever in my origianal full fat 410. I had a orion vortex speedo in that and that was quite big. Think I'll wait till my combo turns up and then decide which gear to put in.

Cheers guys.