Big Bore shock setup for KF and K1 aero
 

OK so I'm new to big bores and would like some advice on setup for the following 2 scenarios

1: High grip astro, bumpy, small jumps outdoors

2: Medium grip carpet, polished floor in places, small jumps and rollers indoors

Any advice welcome, I'd like to know everything if possible (pistons, rebound, oil, springs etc.)

Thanks in advance

I tend to use

FRONT (for indoors)

3 holes, with core rc 450cst shock oil and 4.0 springs

REAR

3 holes (drilles out to 1.65mm) with core rc 400cst shock oil and 2.5 or 2.0 springs

Hope this helps