Kyosho rear wheels on Xray
 

Before I go an sell all my Kyosho 12mm rear wheels, is there any way to re-use them on the XB4?

I have loads of different tyres mounted already for outdoor, so just wanted to be certain there wasn't an adaptor or something!

Ta

Xray T4 hexes (12mm).
Guess you will have to enlarge the hole on wheels too (a reamer might do it), not much so not critical to do.

I won't bother myself and go for Xray 10pce wheels packs with 14mm hexes.

Team C 12mm hex's will fit..just ream the small ridge away & use thin spacers behind the pins to stop the wheels binding- may also need a 4mm washer before the nut as the nuts will bottom out as the hex's are narrower than the XRay ones..
Cheers, Gord...