Hobbywing Xerun SCT PRO ESC
 

Hi All,

I'm having a clear out as I have just too many cars and bits!

I have a barely used Hobbywing Xerun SCT Pro sensored ESC. This has been loaded with the latest software and is ideal for either 1/8th or Short Course buggies

Specs are:-

1 Specification
1.1 Output: Continuous 120A, burst 760A;
1.2 Input: 6-12 cells NiMH/NiCd or 2-4S Lipo;
1.3 BEC: 6V/3A (Switching mode);;
1.4 Resistance: 0.0004 Ohm;
1.5 Motor Supported: Sensored and sensorless brushless motor
1.6 Suitable Motor:
With 6 cells NiMH/NiCd or 2S Lipo: KV≤6000;
With 7-9 cells NiMH/NiCd or 3S Lipo: KV≤4000;
With 10-12 cells NiMH/NiCd or 4S Lipo: KV≤3000;
1.7 Suitable Car: 1/10 and 1/8 scale short course truck / buggy / tuggy;
1.8 Cooling fan: 5-6V; * Note #1
1.9 Size: 53.5mm(L) * 36mm(W) * 36mm(H).
1.10 Weight: 99g;



Looking for £45 plus £3.50 postage and paypal fees.

Last chance before this goes on eBay at the weekend so grab a bargain

Cheers