B4.1 front end to 12mm hexes
 

New to associateds and want to convert the front hubs on my c4.1 to front hexes what parts do I need
( im a fan of jconcepts)

Hi,

You need the hex steering blocks (AS9880)
Hex axles either the AE (AS9880) or the JC (JC2169)
I've found the JC axles better.

You'll also need the hexes, AVID / JConcepts / Proline front alloy hexes.
OR AE do a plastic version as well.

Don't forget the hex wheels, AVID / JConcepts / Proline / AE.

MiCk B. :-)

brilliant reply from Mick.. not sure of the benefit of hexes on front wheels 2wd ? obvious benefit on driven wheels , but rolling wheels ?:confused:

Here you go mate

http://number5rc.co.uk/jc2135-blue-c...1x6-p-195.html

http://number5rc.co.uk/jc2169-front-...ion-p-444.html

You will need the steering blocks as mentioned by Mick, but all the other hardware & shims will be covered off in the axles pack

The benefit is superfical i like jconcepts mono wheels

Well,

No bearings in the wheels is a bonus. Much easier to change wheels trackside.

MiCk B. :-)

Was considering converting my Centro to front hexes does anyone do a slim front wheel?