44.2 and 4.2 for beginners advice
 

Im running both Schumacher and Associated 4wd and 2wd cars, I just wanted to get some advice on the HOP Ups for the 4.2 and 44.2 that you guys would see a benefit from the stock car.

Ive slowly doing the K1 and KR but as ive found these 2 require some tweaking before there perfect, I find the associated drives good out the box, but wanted a steer on what if any upgrades you guys would have on a stock car to get the best from it.

I may at some point go C4.2 but that's along way off.

thanks in advance

P.S Also whats a good body option over the standard that makes it look good, would you guys go proline or Jc Concepts or other ?

Proline Bulldog PL3395-00 is a great looking body for the B44.2

AS9783 FT Front Tower Mount, aluminum is a good option part as it strengthens the front of the car up helping to reduce DNF's from heavy front end crashes.

The j concepts steering assembly made a big difference for me, making the steering feel more precise.

I also added an alloy front bulkhead. Seem to have broke fewer a arms with that fitted and they have less back to front movement too.

Lowered wing mount and alloy front n rear shock mounts certainly look nice too. Havnt really noticed and difference to handling though.

Ceramic diff balls id certainly use, with extra shims in diffs too.

whats the extra shims in the diffs all about?
have seen this mentioned in a few different threads but no idea really what its all about
Is it "required" out the box? or only if you run ceramic balls?

Yeah it's to shim up the diffs on the outdrives to eliminate play, it helps prolong the life of the crown & pinion gears :)

I've run a near enough standard 44.1 for the past few years Rob, barring a few tuning options the only other thing I did straight away was replace the diff & thrust balls with ceramic.

Like Danny has said, the Jconcepts bellcrank set makes a difference and eliminates a lot of the play in the steering.

From advice and trial and error. Extra shims on the gear side meshes the gears a bit tighter. Result is they dont get damaged as easily. I shim normally but use 6-7 on the outside of the gear. Havnt killed a diff gear since doing this.

Id do it out the box yes.

thanks for the info guys :-D

what shims are required?
are they a standard associated part or will any kind do?

Standard associated diff shims.

cool thanks guys, I,ll seek the items.

Should be there Sunday if I get my Radio

Just to add on the shim advice.
For the b44.1 this is great advice. But for the b44.2 ae have already done this for you. The .2 now uses 9shims in each diff. If you follow the kit settings exactly it feels tight but once run in it creates the perfect mesh with no side to side play in the diff.

Avid chassis is meant to be a really good uograde, I'm looking to get one soon

It worked for me, but feels looser on slippy tracks indoor.

Extra rear toe helps too, forgot that. 0.5 or 1 degree rear hubs.

Shims are in the manual.....diff build page !!!

http://www.petitrc.com/setup/associa...ldAdvice/4.jpg

Part number 3911

Use the shims to move the bevel gear closer to the pinion gear to stop them stripping teeth ;)

Tools...
 

Hello, kinda of newbie here. I just got my B44.2 and have not build them yet. I need help on the tools needed to build the kit. I know its imperial but which one should i get? Can anyone help me?

Heard from my hobby shop that AE change the bolts/nut from imperial to metric but im not to sure about it. Anyone care to share a light on this? Or its just rumors?

Thanks in advance. Cheers...:thumbsup:

Hi greenruby

Firstly the kit is imperial. I believe you can buy a metric screw set if that is what you want, however:

Std imperial tools required

Hex Drivers
3/32
5/64
1/16
0.05"

Nut Drivers
1/4
3/16
11/32

Id recommend getting these and a cheap set of nut drivers off ebay.

http://www.rccarshop.co.uk/index.php...093-5-pcs.html

Every hex you need here. I only ever use 3 nut drivers.

Hi guys thanks for the heads up. I will get those soon...very soon. :D
Anyway i read somewhere that RPM ball cups are good hop ups for B44.2 and T-Bone racing front/rear bumper to protect those arms. Avid chassis are great too.
:thumbsup:

I use these. Never had any issues with them popping off etc.

http://www.losipartshouse.com/servle...2-Super/Detail

+1 for Lunsford. ;)

Hello, do i need arm reamers when im building the front/rear arms. Thanks.