Durango DESC210R set up
 

I've just bought the above kit cheap as chips from MB Models and need a set up for high grip astro? Has anyone got a set up they would like to share with me ;)

AJ

Hi,

I'd start with
45wt oil in the front, 30et in the back.
3 deg rear toe in
1.5 deg camber all round
30 deg caster
long front camber link, medium rear camber link.

Are you planning on running shorty or normal length lipos?

Paul

Thanks :) I was planning to use my saddles longways

When I run my sticks I run them as far back as possible with about 175grams under them, with shorty I run them in the middle with 200 grams under them.

The added weight is a just personnal preference, so worth trying with and without

Paul

Thanks for the advice, it gives me a good start :)

Another quick question, should I build it 3 or 4 gear mid motor?

I'd go 4 gear mid for high grip, 3 gear rear for low grip

Thanks for the advice, I've just finished the building the roller. I used the tips on Durango's "in the pits" guide and the diffs and shocks are lovely and smooth.

At points the manual weren't too clear, but I sussed it all out, but one thing I didn't like was the stupid sized 1.3mm driver needed for the bleeder screws and piston retaining screws lol