T4 Set Up
 

Hi,
Does anybody have a Astro set up for the T4 right down to if you have cut the top decks and swopped shocks from front to back of the tower?

What grip level? that make all the difference and are you using ball or gear diff?

on my x4te ( same car ) I ran

front and rear top decks cut,
geard diffs 7000 front 5000 rear ( with 4 planetry gears )
kit pistons drilled to 1.4 each hole
450 / 500 cst front
350 / 400 cst rear
losi blue / black front springs
kit rear springs
middle hole rear shock tower
inner hole on wishbone
shocks swaped to front ( mote pivot in corners )
inner hole rear toplink
inner hole on 1deg Durango hubs with hobao h2 wheels ( widens rear track )
inner hole front shock tower
outer hole on wishbone
inner hole on top link
2mm spacer on outer ball joint using 13deg hubs
65gram weight between lipos ( where plastic spacer should be )
remove casing round spur gear to reduce heat
alloy chassis depending on track

Hi,
Thanks for the replys it would be high grip and I am on ball diffs