![]() |
Are any of the 1s Esc's inbuilt becs up to Savox 1251
Just wondering if there are 1s esc's that are 100% 1s compatible and that can drive the higher draw servos like the Savox 1251 / Ko Propo Ids 2413 without glitch issues from their standard becs i.e no voltage boosters?
Do higher C rated lipos help in addition or is it purely the problem of getting a reliable 6v supply from a 3.7v source? cheers SR |
Using the savox servos and Spektrum Rx I had the same problems with Nosram Pearl V2 and Orion R10 1s esc. Had to use a cap on the rx with the Nosram and a separate booster with the Orion. Solved all problems when changing esc to Viper VTX1.
|
Cheers Plasmag, are you still using a cap with the Viper? ( always use them with Savox in any scale at mo!)
|
No cap needed with the Viper.
|
Thanks. Interesting to see they give the bec on the vtx1 as 4.5-5.5v which seems lower than some but if it works better than the ones stating higher...
|
I also use the Viper VTX1 but with a Sanwa receiver and low profile Blue Bird servo. Never glitched once and mighty quick, easy to program and smooth. I find even with the endbell timing turned up on my 13.5t Thunder Power motor and the with the motor getting pretty warm the speedo is as cool as a cucumber.
A big shame that no one is still importing this unit into the country even though some shops are the VTX10R units. |
Yes I can see what you mean, the Viper has a more stable bec output whilst the esc is under load.
This was confirmed by using the progauge, which you can monitor the rx voltage with. Handy little tool. |
Quote:
|
I've been using a viper vtx1 in my superstox with spectrum and savox 1251 - I found I had to run the spectrum capacitor on the Rx though or had glitching problems.
Super quick and smooth esc though :) |
cheers Rat Monkey
|
Hobbywing 1s versions works fine
|
All times are GMT. The time now is 01:02 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com