oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Team Associated (http://www.oople.com/forums/forumdisplay.php?f=24)
-   -   C4.2 (http://www.oople.com/forums/showthread.php?t=134115)

neallewis 08-08-2013 01:06 AM

C4.2
 
On AE site now: http://www.teamassociated.com/C4.2/

http://www.teamassociated.com/pictur...0/C0060_md.jpg

No body shown, and carbon side braces still an option. They didn't stop the old one from bending... I hope they have used a better grade of alloy for the chassis.

Aire valley 08-08-2013 09:06 AM

Well spotted Neal....looks interesting but it is rather surprising that they didn't take the opportunity to redesign the chassis, especially as they seem to have done the gearbox, rear hinge pins,battery layout etc.:confused:

KRob 08-08-2013 10:42 AM

The material used for the C4.2 is much harder then the original C4.1 chassis.
It is also wider towards the front end :thumbsup:

But I'm sure people will still bend it if they crash hard enough...

janus_77 08-08-2013 11:03 AM

Quote:

Originally Posted by neallewis (Post 794849)
On AE site now: http://www.teamassociated.com/C4.2/

http://www.teamassociated.com/pictur...0/C0060_md.jpg

No body shown, and carbon side braces still an option. They didn't stop the old one from bending... I hope they have used a better grade of alloy for the chassis.

Guess that means no B5 anytime soon..... ;)

Pownabown 08-08-2013 11:28 AM

Anyone know if the new c4.2 rear tower fits a c4,1?

Bust my rear tower but thought i would wait for this if it still fits?

Big G 08-08-2013 11:33 AM

It won't Nathan. Completely different fitment :)

Robin A 08-08-2013 11:39 AM

Does anyone know if the recently released C4.1 +8mm chassis is the same as the one in this C4.2 conversion kit? :confused:

SLEENAD 08-08-2013 11:53 AM

Will a geardiff fit in the moulded gearbox?

tony12795 08-08-2013 12:08 PM

Quote:

Originally Posted by Robin A (Post 794951)
Does anyone know if the recently released C4.1 +8mm chassis is the same as the one in this C4.2 conversion kit? :confused:

No

Quote:

Originally Posted by SLEENAD (Post 794961)
Will a geardiff fit in the moulded gearbox?

Yes

Big G 08-08-2013 01:42 PM

Quote:

Originally Posted by Robin A (Post 794951)
Does anyone know if the recently released C4.1 +8mm chassis is the same as the one in this C4.2 conversion kit? :confused:

they aren't the same no. the C4.2 is 9mm longer than the original C4.1 chassis design as well as being tweaked along the way :)

ste_lazzaro 09-08-2013 12:03 PM

..And here I am with my usual question:
Will the C4.1 Bul Dog body fit the C.2 also?
Will the undertray fit, maybe after some trimming at the back?:confused:

wezzer 09-08-2013 01:22 PM

hi
no, the layout has changed on the chassis width so in short it wont directly fit!
it may be made to fit with some trimming but as this is a completly new conversion kit its having its own specific body.

DekelzMan 10-08-2013 03:42 PM

Greetings from Canada!

Really excited about getting this C4.2 conversion kit, however I'm really not a fan of the cab-forward body styles and since I'm only running on small indoor carpet tracks, any aerodynamic advantages are moot. Is there somewhere I can order online the original "cab-rearward" body for the C4.1?

Many Thanks!

Mick

Big G 12-08-2013 09:17 AM

http://centro-rc.com/C4-1-bodies/C4-...ell-Wing-Clear

DekelzMan 12-08-2013 03:51 PM

Many Thanks!

neiloliver 12-08-2013 09:06 PM

C4.2 Question & Answer Wizard:

(Q) Will the 'x' from my C4.1 fit on the new C4.2?

(A) No.

:lol:

gazhillAE 14-08-2013 08:24 AM

Quote:

Originally Posted by neiloliver (Post 795838)
C4.2 Question & Answer Wizard:

(Q) Will the 'x' from my C4.1 fit on the new C4.2?

(A) No.

:lol:

Don't even think that non cab forward will fit c4.2 either!

neallewis 14-08-2013 11:40 AM

Quote:

Originally Posted by gazhillAE (Post 796179)
Don't even think that non cab forward will fit c4.2 either!

That's a good thing though. The old body looked horrible!

RDG 40 18-08-2013 03:20 PM

Do we know uk retail yet? Straight conversion to stated $?

Rick-J 05-09-2013 07:39 PM

when?
 
Any news on the release date. Model shops say the 6th is it going to be ready?
It,s gone a bit quite.


All times are GMT. The time now is 05:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com