oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   1/10th OFF ROAD (http://www.oople.com/forums/forumdisplay.php?f=161)
-   -   Proline Holeshot's - Invernational (http://www.oople.com/forums/showthread.php?t=133345)

Allan1875 26-07-2013 10:32 AM

Proline Holeshot's - Invernational
 
With a couple of weeks to go i have managed to source one pair of 4WD fronts so far, leaving me a wee bit short.

Does anyone know why there seems to be a stock problem at all the main shops? Will anyone be selling these trackside?

I've been told i am going to need 2-3 sets to last me Friday to Sunday so i'm currently 5 pairs short.

Anyone else having an issue sourcing them?

It says on CML's website they are available to buy but i don't want to put an order in just for that to be false.

mark christopher 26-07-2013 10:48 AM

Due at mbmodels any time
last year i did 4 wheel drive on two sets
but then i was not trying to win it ;-)

aeb4 26-07-2013 10:49 AM

Quote:

Originally Posted by Allan1875 (Post 791878)
With a couple of weeks to go i have managed to source one pair of 4WD fronts so far, leaving me a wee bit short.

Does anyone know why there seems to be a stock problem at all the main shops? Will anyone be selling these trackside?

I've been told i am going to need 2-3 sets to last me Friday to Sunday so i'm currently 5 pairs short.

Anyone else having an issue sourcing them?

It says on CML's website they are available to buy but i don't want to put an order in just for that to be false.

MB have quite a few 4WD fronts in stock, both in M3 and M4 compound, however they don't have any rears.

http://www.rccarshop.co.uk/index.php...s/proline.html

wezzer 26-07-2013 10:51 AM

M4's in both 4wd fronts and rears are in stock at this very second, only M3 fronts available right now, M3 rears will be in stock in around 14 days.

Allan1875 26-07-2013 03:23 PM

I've ordered a set of M4's as a backup, i've heard they work pretty well aswell and some folk prefer them over M3.

I just posted this on facebook, anyone find the same:

"Just putting a set of m3 hole shot fronts on wheels and those inserts are massive.

It's not fitting snug, im either going to have to trim the bead slightly which is the most likely option, or trim the insert. I'd say the bead is probably to blame.

Anyone share any experiences with them? I know they need the big inserts so want to avoid trimming."

MiCk B. 26-07-2013 03:41 PM

Hi,

There is a good chance that the insert with the 4wd fronts are the same (similar) size to rear inserts.

Trim the insert so they are the same size as the wheel.

MiCk B. :-)

Andyp 26-07-2013 08:36 PM

Quote:

Originally Posted by wezzer (Post 791886)
M3 rears will be in stock in around 14 days.

Mmmm is the invernational in around 14 days also ??? Could be interesting...

The Dude 28-07-2013 01:41 PM

If you really need 1 pair of front M3 Holeshot, I've found this one in Belgium.

The Dude 28-07-2013 01:41 PM

Sorry, I forgot the link : http://www.mcmracing.com/pro8207-02-...t-proline.html

bally 28-07-2013 08:47 PM

We have a very limited number due tomorrow :) Watch our website around dinner time!

http://www.rccarshop.co.uk/index.php...s/proline.html

Thanks
MB

TARTMAN 28-07-2013 09:07 PM

inserts
 
the front come with large inserts, you just cut them in half that's what I have done fit great.

I to am awaiting rears still not arrived. hope they are in stock in time or going to be interesting indeed!

Danny Harrison 28-07-2013 09:09 PM

Quote:

Originally Posted by TARTMAN (Post 792376)
the front come with large inserts, you just cut them in half that's what I have done fit great.

I to am awaiting rears still not arrived. hope they are in stock in time or going to be interesting indeed!

I imagibe there will be a reasonable stock trackside too. :)

johnnygibbon 31-07-2013 12:07 PM

for 2wd front wheels does any one no if its ribs only or can we run suburbs ect

James 31-07-2013 12:12 PM

You can run any proline front tyre.

8175 ribs are used by 90% of racers. Suburbs are perhaps marginally better on any rougher areas.

Col 31-07-2013 04:16 PM

Jason@mossmodels can also sort you out. He'll be trackside.

http://www.oople.com/forums/showthread.php?t=132365

Danny Harrison 31-07-2013 06:50 PM

I have an extra set of rears spare in m3 if anyone gets desperate. They were for my friend who has pulled out. :)


All times are GMT. The time now is 07:28 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com