oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)
-   -   Lipo storage on UAC50 charger (http://www.oople.com/forums/showthread.php?t=132980)

Boons 20-07-2013 06:54 AM

Lipo storage on UAC50 charger
 
Hi guys,

I've chosen lipo 2s, then it asks amps between 0.1 and 1.0

Is 1.0 correct?

Cheers!

Welshy40 20-07-2013 08:24 AM

Quote:

Originally Posted by Boons (Post 790456)
Hi guys,

I've chosen lipo 2s, then it asks amps between 0.1 and 1.0

Is 1.0 correct?

Cheers!

Sounds wrong. Ive been told if your storing a saddle pack thats 5600 the charge at 5.6, but when storing only three quarter charge it as fully chsrging will make the packs expand.

trax de max 20-07-2013 10:02 AM

1.0 is fine.
They charge 5x faster than that, They get discharged a lot faster than that in the RC.

bigred5765 20-07-2013 10:02 AM

if I remember right the uac50 only discharge stores not 100% sure but from memory and post above I think so

Brownbear 20-07-2013 12:03 PM

Yep, 1amp is the max on storage mode. So if used it will charge up to storage point, or discharge down to it if you haven't run the cell.

And quite right, up to 5amp on balance charge. At 1c charge according to Mah of your battery, eg 3300 mah = 3.3amps.

Boons 20-07-2013 12:39 PM

Thanks guys, very kind of you :thumbsup:


All times are GMT. The time now is 08:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com