B-MAX4 One-way
 

I was thinking about trying a one-way in my B-MAX4, does anyone know the part number and where I might be able to purchase one? I'm happy to purchase a second-hand one if somebody has one? Thanks. Oz

There isn't one you can make a centre one way with some hot bodies d4 parts if you can get them if you look though the b max thread there is a how to

Thanks that explains why I couldn't find one. I'll have a look for the thread.

Sorry to jump in on this thread, but could I ask why 4wd doesn't use one ways nowadays.

Back in my racing days it was mandatory to use them, as it was the only way to get around the corners. Is it just a case that cars are just too powerful now and they wouldn't stand up to the rigours, or is just that today's cars have developed so much that they can handle the corners without them.

You could check out the one way for Yokomo's SD drift cars, parts No D-021

I believe the excuse is that 1% of drivers (those that are likely to make a national A final) are too fast and need to brake these days.
So in their great wisdom, manufacturers chose not to make them because this 1% won't ever use them.

Jurai Hudy almost punched me when I asked if a oneway would come out for the XB4.

Thanks Jimmy, I guess the need for more braking makes sense, although I'm useless at braking:(

I only got back into racing this year after a 20 year break and the available power and car control has moved on a long way. Back in the day you needed to be very efficient to last 5 minutes, which meant keeping it smooth in and out the corners, sadly I still drive like that:lol:

I am selling a Front One Way for a B-Max4 on ebay right now :o
Please feel free to bid away on it - 99p starting price :woot:

one way for yokomo
 

do you have a link for your acution please

one way for yokomo
 

do you have a link for your auction please

Yes - that's it, Cheers Pal !! :)

The One way of the MR4 BX doesn't fit ?

At least it won't be a direct fit in the shaft drive B-Max4 with the BX belt drive pulley. ;)

Hi Mes ;)

I was talking about this one...the front one way.
Not the same ball bearings 12x18 for Bmax4 and 10x15 for BX ( to find 10x18 ball bearings )...same Diff rings...for the pulley...as BX pulley and Bmax4 Ring gear ( BM-503 ) got the same number of diff balls ( same assembly )...perhaps it could be ok ? or perhaps I am wrong , the Bmax4 dogbones perhaps not fit with the BX Outdrive...

But it's right that I never heard someone asking for a One way on a Bmax4...

http://img69.imageshack.us/img69/4378/ygra.jpg

Uploaded with ImageShack.us

bearings for one way
 

Boca sales 10x18x4 bearing im not sure if the one way housing is a direct fit but be interesting if it did

Tomorrow, I try to post a measurement of the Front One Way width...to compare with the Bmax4 Diff (you've got...) width between bearings

Here you've got...

http://img23.imageshack.us/img23/5812/3sf2.jpg

Uploaded with ImageShack.us

B-Max4 2 mm wider, total width 58,5 mm.

Aarrggh !
Too wide...or perhaps with ball bearings wider...10x18x5...

lol...we should forgot I think.

The D4 Front One Way should be the good solution... ;)