xx4
 

anyone got any good setups for the xx4

or what is bloomfield running on his???????????

This is what he said he was running at Broxtowe;

Toe. 1 out
Ride height. 19mm
Camber. -1degree
Sway bar. N/A
Oil. 30wt
Piston. 55
Spring. Black
Limiters. 2mm
Shock location. 2. Middle
Bump steer. Omm
Camber link, 2


Rear
Toe. Standard
Ride height. 19mm
Camber. -2 degree
Rear hub spacing. Long
Sway bar. N/A
Oil. 25wt
Piston. 54
Spring. Red
Limiter. 0mm
Camber link 7-e
Shock location. 2-inside
Wing. LMR/stage 3

This is as much info as he gave me, so cannot help out with any other details. Hope this helps a little though.

any help is great help :)

Oswestry grass
 

anyone got any ideas what the xx4 guys where running setup wise

I've asked Darren for set ups, but I think essentially he is still running as per your last set up request.

hi
having probs with the rear diff, the middle keeps breaking away from the outside, happen to be twice now at 2 different meetings :( run the belt diff position on loose run only 8.5t motor

can anyone help???

cheers simon

I had this once, not on the XX4 but on the XXX. The diff was slipping slightly. The diff balls got very hot and melted the plastic of the diff gear between the balls.

ok will see if thats the prob when new bits arrive