b44 chassis swap for 44.1
 

Hi guys. Is it possible to just swap the chassis on my b44 for the one from the B44.1. is it just a straight swap or is anything else required?

Not sure how much help this will be but this was the list of what was changed from the B44 to the B44.1. I think the motor mount changed as well but don't know if the mounting to the chassis was different.


2.5mm updated carbon fiber chassis for LiPo batteries only (no cell slots) #9774

Carbon fiber LiPo battery tray with removable center section (*optional ballast weight req'd) #9775

3.5 mm thick front shock tower (from 3mm) #9703

Updated front top deck for more durability along with new antenna location #9701

Cam motor mount set #9800

Factory Team 0 degree aluminum rear hubs #9864

Factory Team V2 dual-cap hard anodized shock bodies with threaded collars Fronts: #7475, Rears: #7478
V2 slipper assembly with high-rate spring #7485, 7486, 9736

Factory Team Gold slipper pads #9603

Rear anti-roll bar included #9708

Bleed-screw shock caps #6443

Carbon-fiber battery straps #9786

Servo mounted 3mm closer to centerline

Chassis cut for additional ground clearance

Spur gear changed from 84 to 81 #9651

I'm pretty sure it's a straight swap, I know the .1 motor mount fits the .0 chassis.

Yep, chassis itself will be a straight swap.
But you will need a battery tray of some sort (and the spacer that goes between the cells) as the original plastic tray for sub-c won't fit.

Cheers. I've got the lipo trays and spacer on my b44. Just wanted to know if the chassis was a straight swap before a ordered one

Yes straight swap there the same length and all screws are in the same places so don't worry boss

chassis has arrived and swapped over already only took about an hour