Tekin problems...
 

I turn my speedo on no problems the motor I think is clicking very quietly on start up and nothing beeps or makes a tone like before it has not even touched the ground yet since I have had it, worked this morning not now. Tried without sensor cable, any advise would be great thanks :thumbsup:

EDIT: When it has started it does show lights for my thortle going up.

Batteries, erm, voltage cut-off?

I have tried different batteries and it is set to 4s which i'm using. :)

4S Lipo?

Yeah

this is an RX8?

Yes I looked more into made sure all settings are right and have got 1 2 and 6 and 7 lights on and the type is on brushless.

With LED's 1,2,6 and 7 flashing means incorrect motor type selected, but this also could be a poor connection from the speedo to motor. As the motor is making a small clicking noise it could be that you have the motor cables wired incorrectly or a bad solder joint, so re-check all and ensure that cable A on the speedo goes to connection A on the motor and like wise for connections B and C.