RB6 Rear wing!
 

Do any of you guys find that the rear wing isnt very sturdy am i missing something? Seems to come lose

Be sure to fit the angle shims (either above or below the wing depending on the angle you want to run) and the wing washers and it should be very solid.

cant say ive ever had a problem post up some pics

As matt has said, sounds like you've forgot the shims that go on the wing mount before you position the wing. These, coupled with the washers you put on top before pushing the body pins in, it all makes the wing very secure.

No ive added the angle plates and the shims feels tight until it has been run then lose again :/ do i need to fit both angle plates on either side so im using 4 in total? thats what it looks like in manual

You only put one shim under each side, which one depends entirely what angle you want to run. The wing would then sit on top, then on would go your washers, all held in place by the pins. If its still loose, I can only imagine the holes in the wing are to big? I can honestly say it's not a problem I've had so I'm a bit confused. As Carl has said, post a picture and we can have a look for you. :)

sounds like you have made the holes to big to me