Ezrun set button
 

My button has fallen off! After some 'large' jumps today the set button has fallen off my esc not a problem at the moment but when I eventually change to 2.4 ghz I'll need it to calibrate the new tx any ideas? Can I just bridge the connections with a small screwdriver? Any help would be great thanks :)

You should be able to solder this in as a replacement

http://shop.cpdracing.co.uk/index.ph...roducts_id=584

Thanks for the link does it replace the on/off switch aswell?

Yes. It's the same switch you just need to solder the wires to the current one or attach it to the terminals on the connector that plugs into the speedo

Great thanks for the help :)