oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)
-   -   Help choosing new esc for 2.5t motor.... (http://www.oople.com/forums/showthread.php?t=127006)

git-r 15-04-2013 06:10 PM

Help choosing new esc for 2.5t motor....
 
Hi all,
I know it sounds ridiculous but I'd like a speed controller to run reliably with a really low turn motor for 1:10 on road outdoors on 2s battery...

Currently I run a speed passion reventon pro with 5.5t motor with boost and it's brilliantly quick but the nitro pan cars are still getting away on the straight and I can only run a few mins before it gets too hot!

Can anyone recommend anything?

I see the tekin rs pro apparently has no motor limit - is this true??

Want something that isn't going to break so happy to pay more for quality but don't want to waste any!

thanks in advance:)

imull 16-04-2013 11:27 AM

You're the second person asking this in the last few months, hyperspeed must be popular :D

The tekin and the KO BMC will run 2.5t (according to their specs)

Previous thread here:

http://www.oople.com/forums/showthre...highlight=2.5t

git-r 16-04-2013 12:28 PM

Quote:

Originally Posted by imull (Post 766334)
You're the second person asking this in the last few months, hyperspeed must be popular :D

The tekin and the KO BMC will run 2.5t (according to their specs)

Previous thread here:

http://www.oople.com/forums/showthre...highlight=2.5t


Many thanks for this:)

I searched and read that post already - "how many pieces would you like yourgearox in sir?" LOLOL!

Apparently the KO doesn't run boost so that leaves the tekin.. I've been looking at the Orion R10 - seen some good reviews on rctech forum...

£125 seems a good price too esp compared to tekin:)

Any comments??

Will try and get some sort of combo..

Thanks:)

imull 16-04-2013 02:57 PM

I have to ask why you'd need boost with a 2.5? You're at the limit of the speedo in terms of motor, none of the speedos claim that you can add boost when running 2.5 so I'd be careful.

I'd ask in the Tekin thread here and see what Randy comes back with.

P.S. Post up a video when you do try it, I'd love to see how it compares with nitro :D

MattW 16-04-2013 05:28 PM

The Tekin might run it for a minute or so, but no chance of any longer.

I'd say your only chance is maybe a speedo designed for 1/8 scale, I'd doubt any of the 1/10 speedos would run a 2.5 for any length of time.

git-r 16-04-2013 11:11 PM

Quote:

Originally Posted by imull (Post 766392)
I have to ask why you'd need boost with a 2.5? You're at the limit of the speedo in terms of motor, none of the speedos claim that you can add boost when running 2.5 so I'd be careful.

I'd ask in the Tekin thread here and see what Randy comes back with.

P.S. Post up a video when you do try it, I'd love to see how it compares with nitro :D

That's what i was wondering about running a 2.5 on all the 1:10 speedos - thanks for clearing that up:)

My reasons are the same as why I have a track car with 513bhp -i suppose i'm a bit mad!! :D

Seriously though, watching the speed of boosted 5.5t 1:10 is awesome - looks insane!

Would also like to get a vid... Maybe she would do it... probably not though!

git-r 16-04-2013 11:22 PM

Quote:

Originally Posted by MattW (Post 766416)
The Tekin might run it for a minute or so, but no chance of any longer.

I'd say your only chance is maybe a speedo designed for 1/8 scale, I'd doubt any of the 1/10 speedos would run a 2.5 for any length of time.

Thanks for that:)
decided against the tekin and eneded up going for an orion r10 with 4.5t motor and program card...

Reasons were that 160a continuous seem good and have read some good reports on rctech...

Will try thr 4.5 without boost first and low gearing and see what it's like..
Something tells me it will be 'quite' quick:lol:

Maybe will go for 3.5 at some point but don't want the esc to become unreliable... wonder how the car will hold up?!

ongbenghui 19-04-2013 01:32 PM

Quote:

Originally Posted by git-r (Post 766548)
That's what i was wondering about running a 2.5 on all the 1:10 speedos - thanks for clearing that up:)

My reasons are the same as why I have a track car with 513bhp -i suppose i'm a bit mad!! :D

Sorry, but I don't think running 2.5T on a 1/10 is equal to a track car with 513bhp.

I think it is more of a 1500 bhp which you will run out of gas in 3mins, assuming your engine wouldn't blow up after the run.

LOL.

Neil Skull 19-04-2013 04:13 PM

I ran a 4.5 with Orion ESC and it was stupidly fast accelerating. MY TC tried to Wheelie but that was on high grip! Just keep close eye on temps and watch gearing but I don't think you will be able to match a Nitro Pan car on Acceleration with any set up in 10th EC.
I would be wary about running boost with a 4.5 motor if you do just run small amount to begin and keep an eye on temps. BTW what motor and cells are you running?

git-r 19-04-2013 04:31 PM

Lol! :)

Now that's just what I'm after!!!

I'd probably smash the thing before the gas runs out tho!

Put the orion in last night and it seems very similar to a s.p. pro I have... instructions not the best! Really pleased there's hardly any soldering to do though. The software doesn't work as it should though! Had I not read through a post on rctech I probably would've spent hours getting pissed off with it - it has 2 sensor ports, one for motor and one for program box. Idea being you don't have to unplug anything when changing settings. It doesn't work as the instructions say though! You have to unplug the sensor to the motor before anything can be changed.. VERYY ANNOYING!

Fingers crossed though its all ready to go... track will be open tomorrow and its meant to be nice weather... I've set it to run no timing and boost and have a gear ratio of about 6... quite excited!

Depending on how long it lasts I will be unable to leave the boost and timing settings alone....

Will be fun whilst it lasts!:D

git-r 19-04-2013 05:57 PM

Quote:

Originally Posted by Neil Skull (Post 767288)
I ran a 4.5 with Orion ESC and it was stupidly fast accelerating. MY TC tried to Wheelie but that was on high grip! Just keep close eye on temps and watch gearing but I don't think you will be able to match a Nitro Pan car on Acceleration with any set up in 10th EC.
I would be wary about running boost with a 4.5 motor if you do just run small amount to begin and keep an eye on temps. BTW what motor and cells are you running?

That's good to hear:) a 2 wheel drive tc with a 4.5 and it's front wheels in the air must be fun! :)

will keep an eye on tem... Motor is Orion and batteries are good high c an mah ones. If they're not up to the job I expect the Lipo protection feature on the esc will trigger..


Tbh im not expecting to see a big difference between the 5.5 and 4.5....


All times are GMT. The time now is 07:39 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com