oOple.com Forums - Diff Dullard

oOple.com Forums (http://www.oople.com/forums/index.php)

- Xtreme - VEGA (http://www.oople.com/forums/forumdisplay.php?f=15)

- - Diff Dullard (http://www.oople.com/forums/showthread.php?t=123777)

Dudders

04-03-2013 10:58 PM

Diff Dullard

Hi guys

Finally doing some maintenance!

Taken the diff out to re do it, problem is re assembly!

Looking rear to the front, adjuster on the left or right hand side??

Dawg!

clint

05-03-2013 01:10 AM

rear diff the screw head will be on the left side, on the right side in the front..if this is what you are asking??

andoiwebb

06-03-2013 10:55 PM

Errrrrr, are you sure?!!!! Download the instructions from kyosho to be sure!! If the above post is correct, I've been putting in the wrong way around for a year!

Rebelrc

06-03-2013 11:18 PM

Dudders ,what car?
I think Clint is talking x11
If you are talking RB5 vega
Diff adjustment hole left
Hth's

rc_penguin

07-03-2013 08:51 AM

Don't think it really matters, but I always put the diff in so the screw head is on the opposite side to the spur.

Dudders

07-03-2013 09:33 AM

Quote:

Originally Posted by Rebelrc (Post 753449)

Dudders ,what car?
I think Clint is talking x11
If you are talking RB5 vega
Diff adjustment hole left
Hth's

RB5 Vega. So screw head on the left hand side, ala same as spur?

Getpip

07-03-2013 10:32 AM

The RB5 manual is on the net you lazy git!
According to said manual (section 13) ...
Screw head should be on the grooved output side which should be on the left.
:p

RudeTony

07-03-2013 03:02 PM

Quote:

Originally Posted by rc_penguin (Post 753497)

Don't think it really matters, but I always put the diff in so the screw head is on the opposite side to the spur.

Correct

All times are GMT. The time now is 05:47 AM.