oOple.com Forums - Splitting my Recoil

ALL PRICES PLUS POST
__________________________________________________ __________________
4 x FlyPo 1300mAh 7.4v Li-po’s (30C burst, 20C continuous) Dimensions 70mm x 35/36mm x 15mm approx fitted with Micro Deans plugs (Only had around 10 or so charges in them with the balancer) £7.50 each
Small 1000mah 20c Li-po £5.00
Li-po voltage reader £3.50
Prolux balancer (connects to your charger to balance your cells…. please note this is NOT a stand along charger!!) £13.00
Charge lead also included (not pictured) fitted with 4mm corally type cons/Micro deans the other end £SOLD

__________________________________________________ __________________
New Spares:
SWK6022 Suspension Set (£4.99) sell for £4.00
SWK6040 Ball end set (£1.50) sell for £1.00
SWK6020 Shock rebuild kit (for 4 shocks) (£1.99) sell for £1.50
2 x SWK 6062 58T spur gears (£1.99 each = 3.98) Sell for £1.75 each or £3.00 for both
SWK6046 Hinge pin set (£1.99) sell for £1.50
SWK Hex nuts/E-clips/Washers (£1.99) sell for £1.50
2 x 2 pairs of Micro Deans plugs sell for £2.50
5 x SWK6010 Hinge Pin Mounts!! (£2.75 per packs = £13.75) £2.50 per pack or all 5 packs for £11.50
SWK6014 Shock Set, Assembled (4) (£9.99) sell for £8.00
[s]SWK6024 Front/Rear Differential Set (£6.25) sell for £5.50[/s] SOLD
[s]SWK6026 Drive Shafts/Slipper Unit (£9.99) sell for £7.50[/s] SOLD
SWK6042 Ball Stud Set (3.99) sell for £3.25
SWK6052 Hardware Bag (£1.99) sell for £1.50
Total price of new spares = (£52.41) Sell all for £35 + post
http://i2.photobucket.com/albums/y23...e/IMG_5232.jpg
__________________________________________________ __________________
Tekin BL system 6900kV with instructions (I think I may still have the box as well) £50 + postedhttp://i2.photobucket.com/albums/y23...e/IMG_5258.jpg
__________________________________________________ __________________
Recoil,
The following will be included in the sale:
Blue alloy motor mount (much better than the kit metal plate thing)
UJ’s front and rear (plus a spare set)
Blue upper turnbuckles (plus a spare set)
Ballraced steering
Ballraced ‘C’ hubs (even smoother steering with these fitted!!)
Raised upper links (to help eliminate bump steer)
2 used shells, 1 black STD Sportworks, and 1 in my normal colours
Hi-Tec HS65MG servo with modded RC18T servo saver (the biz)
Foams (40 shore & 45 shore (all been used at one time or another)
RECOIL SOLD
Updated pics will follow shortly