oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   1/10th OFF ROAD (http://www.oople.com/forums/forumdisplay.php?f=161)
-   -   Ride height (http://www.oople.com/forums/showthread.php?t=121157)

Allan1875 02-02-2013 09:08 PM

Ride height
 
Quite embarrassed asking stupid questions like this but it's the only way I'm going to learn.

Been looking at various setup sheets and noticed that a very common ride height is 21mm at front and 20mm at the rear.

Here is my problem. I currently have a b44.1 with ae silvers on the rear and kyosho silvers on the front.

With the rear shock collars wound to the top the ride height is sitting at about 26-28mm, how can I lower this? Are the figures on setup sheets done with setup wheels on as I am taking my measurement with mini pins on.

Thanks for any help, steep learning curve for me buggies and there will be many more daft questions to come.

Allan1875 02-02-2013 10:34 PM

Just stuck the is car back on black kyosho rears and i can get the 20mm ride height no problem.

One of my mates who races has told me that you have to cut the springs if you want a lower ride height.

So as per cml setup sheets for cavalieri when he runs ae silvers front and ae greens rear, does that means he would have to cut the rear springs? If so, why doesn't the kit come with springs that actually give a decent ride height?!

Shifta 02-02-2013 11:09 PM

You can get different spring cups for the bottom of the shocks, ones with a higher platform for the spring and others with a lower platform.
My guess is you have the higher ones fitted!
Worth a look...

Rich D 02-02-2013 11:25 PM

And have you checked the overall length of the shocks ? Are the eyelets screwed all the way on to the shafts ? Does Cav use any limiters ? Are the kyosho and AE springs the same length off the car ?

I'd be very surprised if Cavileri is cutting his AE springs but may be wrong.

Allan1875 02-02-2013 11:42 PM

Quote:

Originally Posted by Rich D (Post 741050)
And have you checked the overall length of the shocks ? Are the eyelets screwed all the way on to the shafts ? Does Cav use any limiters ? Are the kyosho and AE springs the same length off the car ?

I'd be very surprised if Cavileri is cutting his AE springs but may be wrong.

As I said mate I'm new to this so it's all things I can look into, thanks guys.

Allan1875 08-02-2013 03:34 PM

Figured out the problem that was so blatantly obvious, i couldn't see it.

I presumed as i bought the car 2nd hand, that the shock cups that were on it were correct, however it turns out my car has the offset front shocks cups on the front and rear.

I only discovered this after looking at the shock build in the manual and realising mine were different. Ordered a set of rear shock cups and the car sits perfect now.


All times are GMT. The time now is 04:15 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com