Motor and Esc for 410
 

Whats the best motor and esc for the tight space in the 410.

would be interested to hear what combo other races are using and if possible a picture of how you installed it.

This is my first 1:10 electric and am very confused as to all the different type of motors and ESC there are.

Thx in advance and look forward to seeing what you use, might be interested in buying a combo motor/esc if its at a good cheap price.

Bernie :)

I used a speed passion V3 6.5t motor with the Dualsky 850 ESC loads of room with the Dualsky as its a small footprint and no fan.

Tekin RS Pro
http://img854.imageshack.us/img854/757/87533656.jpg
(But now with Sanwa, no Spektrum any longer)

Reventon Pro & HPI Flux.

Needs a small RX ....

http://farm9.staticflickr.com/8358/8...10db003b6b.jpg
Untitled by eterrier, on Flickr

I've got a Hobbywing Xtreme Stock speedo in my 410 with an 8.5 turn motor.

Thx everyone with the help so far


is it necessary for the reventon esc to have the fan ?

only jusy installed it today, so I've not run it, so couldn't tell you.

BUT .... with it being a 4WD, if it fits in (and it does easily) it's better off being in there.

Andy

http://www.oople.com/forums/showthread.php?t=31939

Have a look on this thread mate, lots of options there!!
I ran the speed passion gt 2 pro speedo and v3 motors in mine, with Sanwa 451r receivers. Tight, but still room and awesome kit!!
Hope this helps.
I might have a speedo and motor for sale soon. What wind are you after?
Pm me if interested.

Hth
Griff

Not really sure thats why I started this thread but guessing around 6.5