B44.1 Battery post height?
 

Hi just hoping someone can help me out. Just bought a new set of Lipos standing 30mm in height. the current post height in the car is a little low in comparrison so I cant get the thumb screws onto the threaded posts. Can the posts be adjusted up in height to make up the difference (possibly by 5mm).

Cheers rich.

Hi,

Assuming you are using these posts:

http://www.teamassociated.com/pictur...06/9706_sm.jpg

Just unscrew them, put a washer or two under them until the are at the height you need. If you need them much longer, you may need to use a longer screw.

MiCk B. :-)

yes those are the ones mate, I think I will look into some longer threaded bar then as I think that will be a better option in the long run cheers:cool:

here ya go mate, this is what i use..........

http://www.dms-racing.com/fruzat/qax...SQL/search.asp

:thumbsup:

Thanks dexter!! I've founfd that cromwells on the team valley stock a massive variety so I'm going to pop down to see if I can grab some off the shelf, if not Ill grab some from your link.

Did you have to use the nuts supplied or can I stick with the pretty blue Factory Team thumb nuts?!

Blue thumb nuts still work with these ;)