oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   I Made This ! (http://www.oople.com/forums/forumdisplay.php?f=25)
-   -   shock piston making service (http://www.oople.com/forums/showthread.php?t=119273)

gixxer 12-01-2013 09:28 PM

shock piston making service
 
I am offering my services for cnc machined pistons, supplied blank for you to drill whatever size holes you want :) and to your own spec ie tapered or flat/standard

Let me know if its of any interest

Cheers john

DrPaul 12-01-2013 09:44 PM

What sort of price are we looking at for a set of 4?

DragonRider 12-01-2013 09:56 PM

Quote:

Originally Posted by DrPaul (Post 732151)
What sort of price are we looking at for a set of 4?

+1 Very interested

coleman758 12-01-2013 10:21 PM

I'd be very interested if the price is ok?

bigt 12-01-2013 10:24 PM

I'd be up for a bag a blanks dude my machinists always to bloody busy a delrin jig to hold um in for drilling too send me your addy and I'll draw the idea up 16mm tapers too ?

john333 12-01-2013 10:29 PM

another interested party here, want some team c big bore pistons to mess about with

john333 12-01-2013 10:30 PM

sorry double post

gixxer 12-01-2013 11:57 PM

I would say about a quid each what does everyone think of that?

Also I will need measurements/drawings or one to copy

gixxer 13-01-2013 09:15 PM

I currently have interest in the following pistons.

Kyosho small bore
Kyosho big bore
Hobao h2


Keep em coming :)

DragonRider 13-01-2013 09:38 PM

Please add Schumacher SV2 Big Bore

Cheers

Mark

gixxer 13-01-2013 09:44 PM

i will mate when i get measurements for them the ones listed are ones i have drawn up ready to be made

Quote:

Originally Posted by DragonRider (Post 732524)
Please add Schumacher SV2 Big Bore

Cheers

Mark


markw 14-01-2013 06:24 AM

Wat about for the k1? I have a spare piston send u that came in the kit.

gixxer 14-01-2013 12:13 PM

Yeah I can do them for th K1 I'll pm you my addy if you want to send it to me, here is the first RB6 run that are going to be tested
Also I have done some for a h2 with revised sizes once they are tested for fit I'll report back

http://i1075.photobucket.com/albums/...IMAG0242-1.jpg

Sportp4ck 14-01-2013 02:45 PM

Quote:

Originally Posted by gixxer (Post 732658)
Yeah I can do them for th K1 I'll pm you my addy if you want to send it to me, here is the first RB6 run that are going to be tested
Also I have done some for a h2 with revised sizes once they are tested for fit I'll report back

http://i1075.photobucket.com/albums/...IMAG0242-1.jpg

WOW, can you make them from P.T.F.E?

gixxer 14-01-2013 02:54 PM

I can't remember what this stuff is called but its very similar to the stuff on non stick pans the only ptfe I can get hold of is very soft and hard to hold a tight limit on and is also sensitive to moisture

NeilRalph77 14-01-2013 04:40 PM

You should do some for the Rango big bore's cos they don't.

gixxer 14-01-2013 07:40 PM

I'll make them for any car all I need is measurements or one to copy

mattr 14-01-2013 08:17 PM

Quote:

Originally Posted by NeilRalph77 (Post 732760)
You should do some for the Rango big bore's cos they don't.

+1 what dimensions do you need? ID, OD and thickness? the Durango Pistons (big bore and small bore) have a counter bore in the centre, would this cost extra? I'd probably look at getting 20 ish of each...... 5 or 6 sets (how much to post to Sweden?)

gixxer 16-01-2013 06:31 AM

Quote:

Originally Posted by mattr (Post 732886)
+1 what dimensions do you need? ID, OD and thickness? the Durango Pistons (big bore and small bore) have a counter bore in the centre, would this cost extra? I'd probably look at getting 20 ish of each...... 5 or 6 sets (how much to post to Sweden?)

I need the od hole and c/bore dia c/bore depth thickness
The price will be the same with a c bore as for postage I don't have a clue mate

NeilRalph77 16-01-2013 06:50 PM

Rango bigbores:-

12.3mm O/D
2.5mm Thick
2mm Through hole
C/Bore 2.6mm Dia x 1.6mm Deep


All times are GMT. The time now is 06:27 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com