differences between the 410 r and v3
 

as above , can someone please tell me the differences between the 2 and parts that need to be upgraded cheers

Shock towers front and rear, big bore shocks, alloy wishbone hangers, battery/chassis brace and bodyshell. I think that's it but it's cheaper to buy a v3 than upgrade an R.

I'd only buy an R to replace worn parts on a V3 or an older full fat car. Due to the price and SPEC difference the R isn't worth it IMHO unlike the original 2010R and the full fat 2010 car where the price difference was massive between the two.

The V3 R is of a lesser spec then the 2010R and the same price when it was released.

Mine was a 2010 R and I was keeping it (still have it) so I upgraded it gradually.

If you already have the V3R you can get carbon shock towers from Fibre Lyte and get the alloy front wishbone hanger that will make it stronger. Over time add the upgrades, big bores aren't necessary and a lot of team drivers use the small bores with big bore springs on the 410.

It's a good car but it'd be the full fat V3 if I was buying from scratch.

thanks for all the info , does anyone have a part number for the alloy hangers and all the parts needed .. cheers

It's only the very front one you need but you'll need the pivot balls aswell.

Don't think the r comes with anti roll bars ether these are about £28 each front and rear.

ok thanks for your help , soo the others aren't really needed then , is there a specific one i need thou .. cheers :)