durango 410 hexs
 

hi can some one tell me what hexs i need to put on my car which i have just brought as it has no hex on rear and small hexs on front but the wheels i have got have large hexs i have looked on some of the british shops online but they seems to be several different types

It sounds like your car has the old style small hex front, pin rear set-up, you'll want some of the 14mm hexes to fit the wheels you have, choice of the std plastic ones, gold alloy Durango ones, red Tresray ones or Exotec do some orangey ones in different widths, but you'd need to be careful that it doesn't make the car too wide to fit in "the box".

Thanks John are front and back the same

Yes they are

I've just converted mine.
You need 4x 14mm hex's (both front and rear are the same) and you need 2x 14mm pins - the drive pins on the rear can be used on the new 14mm hex's.

can recommend the tresrey hex attachments have them on the rear of my 210 and they work really well.

Tresrey are the best because they clamp on to the axle with a small screw. No more worrying about pins falling out.

The new Exotek ones that areon their way at present (14mm) are the new locking type too, with a samll grub screw that gopes through to lock aginst the drive pin (very neat), available in "Durango Gold" too....

Exotek ones look good and pretty cheap

http://www.redrc.net/wp-content/uplo...m-WheelHex.jpg

They will be just £9.99 per pair over here when they arrive....

Darn wish I would have seen these before getting the durango ones. Oh well mabye in a few months.... :D