oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Atomic Carbon (http://www.oople.com/forums/forumdisplay.php?f=19)
-   -   final gear ratio's (http://www.oople.com/forums/showthread.php?t=11555)

losixxx 13-06-2008 08:35 AM
final gear ratio's
 
what final gear ratio's with brushless are people running on there
s4/A b44's??

Body Paint 13-06-2008 11:39 AM
Chris: I ended up on 20/81 Sunday with a 5.5L and it was spot on, disregard everything I said to you Sunday about gear ratios, I was miles out. JC put me on the right track though.

OldTimer 13-06-2008 11:56 AM
I run the Novak 5.5L on a 21/84 on the atomized B44 which is 10:1

Gear ratio charts below :thumbsup: or click -> http://atomic-carbon.gforceimages.net/su.html


S4 Gear ratios

Pinion
78t
81t
84t
15
13.00
13.50
14.00
16
12.19
12.66
13.12
17
11.47
11.91
12.35
18
10.83
11.25
11.67
19
10.26
10.66
11.05
20
9.75
10.13
10.50
21
9.29
9.64
10.00
22
8.86
9.20
9.54


Atomized B44 Gear ratios


Pinion
84t
15
14.00
16
13.12
17
12.35
18
11.67
19
11.05
20
10.50
21
10.00
22
9.54

GRIFF55 13-06-2008 12:08 PM
I'm on 20/84 with the nosram storm evo 5.5(sintered). How is my old red baby??

jcb 13-06-2008 01:17 PM
I run my Nosram 5.5 with a 12.5mm sintered rotor on an 18 pinion and the standard spur in the S44/B44.

Seems a bit low compared to the others :confused:

losixxx 13-06-2008 01:24 PM
i ended up with 18/78 which gave me 10.83 bit higher than craig and jc but when i ran 19/78 10.26 to give similar to c & jc my motor and esc came off roasting, mind it was a very hot day and mega straight lol

will give 19/20 a try at different track next time out

freud 13-06-2008 04:43 PM
on my S4 19/78 5.5 LRP Sintered 13mm 6cell Enenr-g 4600 SMC :thumbsup:

Thomas P 13-06-2008 07:24 PM
17 or 18/81 4.5r :D


All times are GMT. The time now is 04:32 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com