Sofware/Firmware update for my Speed Passion EX2.1 and LPF ESCs
 

Maybe someone from here would be able to help?

http://www.oople.com/forums/showthre...265#post714265

Matt

You can download the SP software or you can use the Hobbywing software. Work the same in practice. Both ESCs will use the same software.

Once you have the software, you need to unpack and install it, then run it (as an administrator). Connect the LCD box via USB, connect the ESC via the receiver plug, power up the ESC with your battery.

Update the LCD Program Box first, make sure you use the firmware for a V2.x ESC. Then update the ESC, 508_NO_TIMING is the Blinky firmware.

Power down, disconnect and reconnect the ESC as usual. Recalibrate the ESC to your transmitter. Change settings using the LCD box.

great.:thumbsup:

downloaded Hobbywing as couldnt get the Speed passion to download properly.

Seems to be ok.

Does this mean i cant change the settings using a non usb LCD box?

i have borrowed the lcd one

Matt

You should be able to still change settings. I have used both HW and SP boxes on either software.