Schumacher cougar Sv2
 

Hi All ,

Need a bit of help with a sv2 the steering servo arm is extremely close to the bell crank of the steering , i had a problem when i raced with it getting caught and locking up one way, are they all this close i have a standard alturn servo fitted

thanks
Braddas

Picture would help!

yeah that might help better lol

thanks
Braddas

You just need a shorter ball stud on the horn, should be this one on it
http://www.racing-cars.com/pp/Old_Ca...i-3/U2722.html
When fitted it is almost flush to the nut
hth
http://i1088.photobucket.com/albums/...3/DSC_1159.jpg

Thanks Gainsy

think i need a different servo horn the one on yours is offset backwards quite a bit compared to mine ,how much gap is between servo arm an bell crank in straight ahead position ?

I don't think you have a Schumacher servo horn on http://www.rccarshop.co.uk/index.php...orns-2688.html

About 3mm gap with wheels straight

Hi

went and bought a proper servo arm today and fitted it problem now sorted thanks to everybodies input , sure i should of got one in kit when i built it though , my kit from a sealed box was missing quite a few bits so didnt notice that it may have been missing.

thanks again everyone
braddaz