bearing part number
 

Hello chaps just a quick question I am replacing the rear hubs on my db1 I have got the hubs part number UM519 what bearings go on the inside? Part numbers or bearing sizes would be a great help :)

The kyosho part number is BRG001TS and the size is 10x5x4

Kev

On the outside is 10x5x4 but the inside is a bigger o/d

JOHN they are the same size inside and out buddy:p

Yep, same size inside and out on the plastic hubs.

Front wheel bearings are the same size also.

You have the um516 Ali hubs on there, bearing is 13x5x4 I believe. Never once seen one of those fail!

The bearings haven't failed in the Ali hubs it's all the slop in the hubs that's doin my head in, so I'm gonna lob some plastic ones on and try and rescue the Ali ones


And the bearings are 10 mm ones, why am I such a flid?

Are you talking about play between the driveshaft and bearings, Bearings and hub, between hex and bearing or suspension pivot pin and hub?

Shims for the bearing to hex are available i think in 0.1, 0.2 and 0.3mm.
Small shims can be used on the pivot pins.

Give me a call you have my number.

Cheers

Play between bearings and hub and on the pivot pin