oOple.com Forums - TRF Wing Mounts

oOple.com Forums (http://www.oople.com/forums/index.php)

- Tamiya (http://www.oople.com/forums/forumdisplay.php?f=22)

- - TRF Wing Mounts (http://www.oople.com/forums/showthread.php?t=112249)

Aussie Top Force

10-10-2012 09:39 AM

TRF Wing Mounts

Does anyone know of a good after market wing mount for the TRF 502X?

The plastic quality is too soft and the screws strip way to easily. Using an LMR wing, one big stack off some triples at my track and the screws holding the wing mounts (wing to mounts and mounts to shock tower) were literally pulled out. I tightened them back up but they just kept coming lose again each and every run.

The ones on the TRF 201 are nearly as bad. Same type of plastic.

metalmickey0

10-10-2012 10:59 AM

I`ve not had that problem with mine and i crash alot. So cant you put longer screws throo and then a nut on the end? Thats what i`d do anyways

Aussie Top Force

11-10-2012 07:30 AM

I did think of that. Thought I'd test the aftermarket 1st.

kidcongo

15-10-2012 01:38 AM

That's what I did as well. It looks tidy of your're not a hack. You just drill the bottom hole all the way through with a 3mm drill and put a longer screw in with a lock-nut. Problem solved. The issue I have heard with the aluminum aftermarket wing brackets is that they are so rigid, your shock tower cracks instead, which would suck.

I would stick with the stock soft plastic and try the screw trick. It works for me.

All times are GMT. The time now is 04:58 AM.