s.shields set up
 

Hi all, what set up were you running at the regional on the X6's?

I think it varied Tel, the 3 cars in the A all had slightly different setups on them.

Mine was :

Front black spring 30wt red piston outer hole on arm and middle on tower.

( i did try blue spring and moved the shock to the inner on the arm to get more steering on the slow slippy corners, whilst this worked it made the car hard work at times)

Red spring rear 30wt red piston hole 2 on tower and inner on arm, 3 deg toe and 4 deg anti squat.

(i broke the 4 deg block in rd1:cry::lol:)

I dont have any hangers or BK2 axles yet either;) The car felt very good im looking forward to tally, i just hope it is dry:(

On my car [with AE shocks] I used Ellis' setup from Oz except the shocks i used 35wt front, #2 piston, blue springs. on the rear i used 30wt, #1 piston, silver springs

HTH

Ok cheers, where would I find Ellis's Oz set up?

I ran mine with HB shock on at the weekend. Ok the weather was crap and grip was minimal unless you had full spikes....which I didn't.
But the car felt easier to drive and managed 11th in the only round that I took part in. Which wasn't bad considering I'd not got a good feel for the conditions like everyone else did, because they raced in round 1, and I hadn't.

Going to leave them on for Tally, and see how things go there.
I would assume that the HB shock are nearer the Losi shocks, as the Losi spring fit them properly.

Here's the setup :)

Cheers matty.:thumbsup:

No probs

the one attached