oOple.com Forums
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Team Durango (http://www.oople.com/forums/forumdisplay.php?f=80)
-   -   Tresrey battery strap + black chassis (http://www.oople.com/forums/showthread.php?t=111236)

Aran 27-09-2012 03:45 PM
Tresrey battery strap + black chassis
 
spotted this on the Tresrey blog!

http://tresrey.img.jugem.jp/20120927_2319842.jpg
http://tresreyblog.com/

The battery strap looks pretty good, don't see anything wrong with the stock one though, but I am interested in the milled out black anodised chassis! You can see it in one of the pictures :thumbsup:

AfroP 27-09-2012 04:02 PM
Quote:
Originally Posted by Aran (Post 698548)
spotted this on the Tresrey blog!

http://tresrey.img.jugem.jp/20120927_2319842.jpg
http://tresreyblog.com/

The battery strap looks pretty good, don't see anything wrong with the stock one though, but I am interested in the milled out black anodised chassis! You can see it in one of the pictures :thumbsup:
Could be the new moulded chasis off the rtr model.

OneKiwi 28-09-2012 06:27 AM
Damn that revention pro isn't small is it

jo90 28-09-2012 06:54 AM
Why has the guy put a generator in his car...oh no wait, thats the speedo. :woot:

Aran 28-09-2012 09:45 AM
Does the plastic chassis have some milling at the front, looked aluminium to me!

The new sp pro disappointed me, thought it would be smaller

bender 28-09-2012 10:28 AM
the chassis pictured there is clearly aluminium, you can see the milled sections - i'd be amazed if that was moulded, plus you can see the colour difference between the chassis and the other plastic parts close to it

/tobys 28-09-2012 10:35 AM
RDRP chassis? Exotek maybe?

Will be an aftermarket part from someone...

Aran 28-09-2012 10:55 AM
its a Tresrey chassis ;)

probably +8mm too

Darren Boyle 28-09-2012 10:56 AM
I doubt that it is either of those two, since RDRP's is not out yet and currently Exotek have no plans to make one....

AndyG 28-09-2012 12:33 PM
Quote:
Originally Posted by OneKiwi (Post 698748)
Damn that revention pro isn't small is it
quite like the look of the Reventon, so I took a look at sizes....

HPI Flux Pro - 37.5 x 37 x 29.5mm (with fan)
LRP Flow - 32 x 34 x 21mm (no fan)
LRP/Nosram SXX V2 - 30.5x33x21mm (no fan)
LRP/Nosram SXX V1 - 30.5x34x21mm (no fan) < what I currently use
Reventon Pro - 40 x 35 x 20mm (no fan)

not promising for a Durango 410, but not too different from a Flux Pro !!

Good price / feature set though.

Darren Boyle 28-09-2012 01:28 PM
Quote:
Originally Posted by AndyG (Post 698840)
quite like the look of the Reventon, so I took a look at sizes....

HPI Flux Pro - 37.5 x 37 x 29.5mm (with fan)
LRP Flow - 32 x 34 x 21mm (no fan)
LRP/Nosram SXX V2 - 30.5x33x21mm (no fan)
LRP/Nosram SXX V1 - 30.5x34x21mm (no fan) < what I currently use
Reventon Pro - 40 x 35 x 20mm (no fan)

not promising for a Durango 410, but not too different from a Flux Pro !!

Good price / feature set though.
The Vampire SR1+ is quite favourable compared with some of those sizes too at 30.6 x 33.8 x 32.1mm and is proving very popular also...

AndyG 28-09-2012 02:15 PM
Quote:
Originally Posted by AndyG (Post 698840)
quite like the look of the Reventon, so I took a look at sizes....

HPI Flux Pro - 37.5 x 37 x 29.5mm (with fan)
LRP Flow - 32 x 34 x 21mm (no fan)
LRP/Nosram SXX V2 - 30.5x33x21mm (no fan)
LRP/Nosram SXX V1 - 30.5x34x21mm (no fan) < what I currently use
Reventon Pro - 40 x 35 x 20mm (no fan)

not promising for a Durango 410, but not too different from a Flux Pro !!

Good price / feature set though.
For the Reventon, the "footprint" is listed as 35 x 35 x 20mm, but the manual says "size" is 40 x 35 x 20mm - guessing the difference is the PCB extrusion.

Need to compare apples with apples. 35x35 isn't too bad.

Aran 29-09-2012 11:46 AM
It's fits nice snug, seen the new sp Reventon pro in a dex410 and it seemed alright, but depends on your reciever too I guess!

AndyG 08-10-2012 04:00 PM
really? wow.

Got a picture ? would love to see that !

OneKiwi 08-10-2012 04:58 PM
If thats the molded chassis then that brace is surly going to stiffen it up if one set of screw holes aren't elongated

Aran 09-10-2012 11:49 AM
its official now! its a lightened chassis, except production model is clear anodised not black
http://www.area52.cc/news/2859-tresr...ck-towers.html

Cream 09-10-2012 12:05 PM
Quote:
Originally Posted by Aran (Post 702273)
its official now! its a lightened chassis, except production model is clear anodised not black
http://www.area52.cc/news/2859-tresr...ck-towers.html

Wow I guess Tresery really did like my tower conversion. Guess it may be time to start just selling direct again and reducing the price.

Aran 09-10-2012 12:47 PM
Quote:
Originally Posted by Cream (Post 702283)
Wow I guess Tresery really did like my tower conversion. Guess it may be time to start just selling direct again and reducing the price.
I think a few copycats liked your shock towers!

av4625 09-10-2012 10:15 PM
Quote:
Originally Posted by Cream (Post 702283)
Wow I guess Tresery really did like my tower conversion. Guess it may be time to start just selling direct again and reducing the price.
dude if i was you i would be rippin u designed the bloody thing and made and it looks beast and now 2 or 3 other companys are making EXACTLY the same thing with no differences god damn!

Cream 09-10-2012 11:20 PM
Quote:
Originally Posted by av4625 (Post 702509)
dude if i was you i would be rippin u designed the bloody thing and made and it looks beast and now 2 or 3 other companys are making EXACTLY the same thing with no differences god damn!
Gives me open house to do the same to them. Which I've done my best to avoid in the past. I still belive mine is the best. Made from high grade light weight materials.


All times are GMT. The time now is 02:00 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com