B4 bodyshell
 

Hello I have a b4 but the side pods on the shell are not high enough to get my esc and fan fitted , could somebody tell me what she'll fits the b4 easily with higher sides please.
A picture or/and link would be fantastic
Thank you

Hi Steve, what motor and esc setup do you have?
You shouldn't need to run a fan in 2wd, however, I have seen some run a fan in front of the esc to blow air over it instead.

Tends to be a struggle to find a B4 shell with that extra height precisiely for that reason.

Plenty of room in the proline bulldog shell. The +8mm shell will fit on standard sized chassis, you just trim a bit more at front around the steering arms.

http://www.rccarshop.co.uk/index.php...ated-b4-1.html

Remove the fan and fit it in front of the ESC so the air blows accross it, this is how I've run mine without any issues.

Hello pete I've got the Orion r10 esc and I would like to keep the fan on top of the esc
Thank you Neal

I think you will struggle to find a shell the accommodates the R10 with the fan on top. I use an R10 in 2wd and do not use a fan. You really don't need it.

If you really want to use it I think you'll have to do what the other guys say and mount in front to blow the air on to it.

Dave