b44.1 1st time setup servo probs
 

hi all,

just setting up my my b44.1 for the first time,
got the motor in and the esc, but when i got to the servo it does not fit properly,
it doesn't fit properly as is it sits too close to the steering arm which rubs against the servo when turning,
i have fitted it as the instruction book,
i am using hitech servos as this is all i have from my 1/8 buggy,
do i need to use a different servo?
drilling two new holes about 8mm back seems the easier option to me or would this weaken the chassis too much?
is there an easy fix or a trick or two that people use?

cheers rob.

You used to be able to use any servo in the B44 but the mounting was moved in the B44.1 I know Savox catch and Futaba don't.

People have also told me that the holes in the B44.1 are not consistent.

Yup, I had this trouble with a Savox in my B44.1. I used a Dremel to grind down the plastic till it worked without rubbing

servo probs
 

hi all,

thanks for the info guys,
got it sorted now couldn't have done it without your help,
cheers rob.