1s Lipo from hobbyking & booster, will this work?
 

hi all, having issues with a single NIMH cell (not bad, lasted 2 years!) so considering getting a LIPO instead and runing that instead of 2 packs of 500Mah NIMH's.

looking at hobbyking i can get one a 5000Mah lipo for £12, so how much would this cope with a nights racing (4x5mins) as i have heard that it should cope fine (or will the 5600 be better?) http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html

also what booster will i need? i also have a core 2.4G setup.

i am running a mardave brushless setup, and people have had issues with this with 1s, and again i dont want to buy lipo then find it is of no use!

any advice accepted!

Hi mate, dave @ TOP models has the boosters ;-) same as this http://www.rcracinguk.com/index.php?...oducts_id=4944

I've been running just 1 Reedy LiPo 6500mAh 3.7V 65C which lasts all night with repeaking inbetween heats, but may go to 2 so they get a proper charge due to the voltage output of the Lipo.
HTH Steve :)

just looking at the spec of the ESC and it says

Input Voltage.......4-6cells NiMH/NiCAD (1.2Volts DC/cell)
........................2cells Lipo (3.7Volts DC/cell)
.....minimum input 4.8V maximum input 7.4V

That rules out the 1s lipo then, and probably why a lot of people with the mardave in the club had problems and ended up buying a new ESC.

Although looking positive for the battery now, i used the novak discharger to take it to 0v and then charging it peaked at 350, but now seems to be fine, currently at 3400Mah so may have rescued it, just need to cycle it again to make sure.

it also says,

Hi all i have just brought a sky rc toro 1s 120A esc for £44.90 arived in 10 days from hong kong it runs 1 cell and 2 cell also 4 cell nimhs and it awesome easy to set up too if you want a link let us know cheers jase

great esc! the only issue i find with them is the soldering is allways poor on the receiver plug and needs resoldering.

Sky Toro 1S ESC
 

Looks remarkably like the Turnigy Trackstar 1cell 120A ESC form HobbyKing :thumbsup: :)

true they do look like the hobbywing 1s 120A same spec and same set up all from the same factory mine is brill no probs as yet and not bad for 44.90

Do you have a program card for it that works if so what card is it and can you post a link. :)

i havent got a card for mine just listen to the beeps its easy if you need a card for it here is the link cheers

http://www.ebay.co.uk/itm/SK-300032-...item3f1a47460c

forgive my of topic but does the toro ESC have boost and turbo timing?

here is a link for a pdf file for the instruction manual and yes its dose and blinky mode too

http://www.google.co.uk/url?sa=t&rct...yDqtFmOZzQOQSQ

problems with my skyrc 1s 120A esc its only putting 3.4v to the receiver anyone else had this problem

I run the hobbyking nano-tech 5.6's:
http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html

And this booster:
http://www.hobbyking.com/hobbyking/s...r_for_BEC.html

The 5.0 nano-techs are ok, as are the slightly cheaper zippy flightmax 5.8A 60C,s: http://www.hobbyking.com/hobbyking/s...r_Lipoly_.html

I'm going to try the A-spec next, as i've heard they are good also: http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html


If you hover about on a hobbyking product page, it will offer you a discounted price.

I run one of these, eBay item 150802335892, 2cell Lipo batteries as a receiver pack.
It's very small, use about 100mah per race and practise powering my servo, receiver, transponder and esc.
I am going to add a voltage regulator to make sure I don't fry anything with 8.4v but its all working well currently.
I plug it in the receiver and leave the esc switch off.
Voltage regulator. 140848551636