1s lipo gearing
 

what size spurs and pinion`s are people running on there lipo powered cars? 48dp

are there any useful link`s that someone could guide me to.

thanks

I use a spur that gives good ground clearance as the rear tyres get real small and I choose a pinion depending on the track, small tight track, small pinion, big wide open trac, big pinion. We build a different track every week and I have pinions from 18 to 26.
Best to find someone in your club with a similar motor and start with their set up.

Oval or Circuit?

everyone use`s 32dp at out club that`s why i`m asking on here.
i have a rollout chart but it`s for a brushed motor and when i use it my car slower and can`t work it out.

i have brushless fitted in 2 car`s for both oval and circuit.
circuit car is fitted with a novak havok 1s esc and speed pasion 13.5t motor.
oval car is fitted with a fusion exceed esc and 13.5t motor and a booster so i can use 1s.

Medium carpet indoor track I'm on 70mmpr + or - 1 or 2 mm depending on track layout.

1s/13.5 full mechanical timing, 'Blinky Mode' esc.
Currently on 70.5mmpr
48dp = 31/70 on 50.7mm rear foams

can't help with oval, sorry

video shows WGT10 but we use the same layout for all classes